|
 |
Engine and Vehicle Settings Adjust the basic fuel percentage for all operation range to suit the increasment the injector flow or the engine displacement.
Product Code：B6_F_1
|
450
|
|
 |
4D Spark Angle Adjust Equipped with a high-precision 20×17 fuel adjustment grid, allowing fine-tuning of fuel delivery across different engine speeds and throttle positions. Fuel can be adjusted by ±100%, enabling you to create a customized and optimal power curve.
Product Code：B6_F_2
|
300
|
|
 |
Crank and Temp. Compensation This function provides fuel compensation control, allowing the adjustment of different fuel compensation curves based on engine temperature to ensure optimal combustion efficiency during cold start, warm-up, and high-temperature conditions. In addition, it enables independent settings for fuel, ignition timing, and ISC (if equipped) compensation during engine start-up, improving ignition stability and reducing start-up time.
Product Code：B6_F_3
|
300
|
|
 |
AutoTune AutoTune processes full range internal fuel map correction to fit target AFR automatically with AF1 or 2 module. WB O2 Closed loop fuel is to correct the fuel, but the results will not memory in ECU after ignition key off.
Product Code：B6_F_4
|
1000
|
|
 |
Ride Mode Matrix Three customizable Riding Mode Matrix Maps (Map1~3) let you freely configure your preferred settings. Whether it’s for efficiency, daily riding, or ultimate performance, switch with a single touch and ride in your own unique style!
Product Code：B6_F_5
|
300
|
|
 |
Real Time Power This function enables "Real Time Power" calculation, displaying the current horsepower and torque values directly on the app’s dashboard interface.
Product Code：B6_F_6
|
300
|
|
 |
Service Alert After purchasing this function, the ECU can provide maintenance interval prompts, including the accumulated mileage and accumulated time of engine oil, gear oil, transmission system, spark plug, coolant, etc. When the mileage or time exceeds the set target, iMode5 or X Tune APP Maintenance service reminder symbols will be displayed on the instrument. (You can use this feature for free by installing iMode5)
Product Code：B6_F_7
|
300
|
|
 |
ECU Dynamic LED Settings With RGB full-color and flashing pattern settings, the ECU dynamic indicator light is not just functional—it’s your signature style.
Product Code：B6_F_8
|
300
|
|
 |
eBoost Advanced Features This function increases eBoost power output and extends the activation duration to 8 seconds. With enhanced output parameter settings, the system can deliver greater power assistance in a short period, effectively improving acceleration performance and overtaking response.
Product Code：B6_F_9
|
900
|
|
 |
Injection Timing Adjust This function allows adjustment of the fuel injection start timing across the entire throttle range and engine speed. Users can configure the injection timing within a range of 420° before to 300° after Top Dead Center (TDC), enabling optimization of fuel atomization and combustion efficiency under different operating conditions, achieving a balance between performance and fuel economy.
Product Code：B6_F_10
|
300
|
|
 |
Backfire Adjust Close Throttle:When the switch turned on, engine will make backfire when throttle closed after acceleration.
Open Throttle:When the switch turned on, engine will make backfire at setting RPM.
Idle Lope:When the switch turn on, engine idle sound style can be adjusted.
Product Code：B6_F_11
|
450
|
|
 |
Backfire Idlelope urn on the special idle backfire and choose from 9 unique sound styles. Fine-tune the frequency and volume to craft your very own signature exhaust note!
Product Code：B6_F_12
|
450
|
|
 |
Stock O2 Fuel Close Loop aRacer ECU will correct the base fuel to improve the A/F and drivability by stock O2 sensor..
Product Code：B6_F_13
|
300
|
|
 |
EXUP Auto 3D Map This function can turn on EXUP Auto 3D Map function and freely set the opening or closing of the valve according to the 3D table of throttle opening and engine rpm.
Product Code：B6_F_14
|
900
|
|
 |
Traction Control Advanced Features This function allows enabling or disabling of the traction control system and supports multi-level intervention strength adjustment, enabling users to fine-tune the sensitivity of traction control according to their needs. In addition, a Traction Control Plus mode (requires both front and rear wheel speed sensors) is available to further enhance drive force management at low speeds, reducing wheel slip and optimizing acceleration and traction performance.
Product Code：B6_F_15
|
1000
|
|
 |
Power Meter This function enables Power Test Mode, where the system utilizes vehicle speed sensors or GPS speed signals to perform dynamic data analysis, estimating engine power output and acceleration performance (e.g., 0–100 km/h, interval acceleration, etc.). This feature helps users quantify vehicle performance under real road or test conditions, serving as a valuable reference for tuning and calibration.
Product Code：B6_F_16
|
900
|
|
 |
Injector Calibration This function automatically measures and sets injector dead time, ensuring precise fuel delivery and stable output even when different injectors are installed.
Product Code：B6_F_17
|
500
|
|
 |
eCVT Advanced Features Customize your eCVT PN map for ultimate control whether you want sporty acceleration, smooth cruising, or maximum efficiency, tailor the gear ratio response to match your ride.
Product Code：B6_F_18
|
1000
|
